Shower Faucet Diverter Problems

The leading cause of tub spout diverter failure is when the spout is used as a foot prop for shaving legs.

Shower faucet diverter problems. Examine for wear and tear replace if necessary. If the diverter can t close all the way it won t create as much pressure meaning you ll get a weaker shower flow and water will still leak out of the tub faucet. In your case the diverter needs to be. How to fix a shower diverter gate step 1 plug the drain hole.

It is always best to release the diverter and allow water to return to flow through the tub spout for a few seconds before shutting off the water. Pry the cap off the top of the faucet handle and loosen the screw. The tub spout you have with the knob on the end of it is a shower diverter. Find a baggy that the faucet fully fits in and fill it with distilled white vinegar you should let it soak for about 24 hours.

Problems relating to shower diverters are not uncommon and it is often necessary to go to the root of the problem in order to correct it completely. The main function of a bath and shower head diverter is to balance the pressure of the water controlling the hot cold mixture ratio. Next thing to do before you start the repairing process is to turn off the water. Step 2 turn off the water supply.

Sediment build up can also affect the function of the dirverter valve. The knob diverts water away from the tub spout and up to the shower head. The valve assembly can be easily taken apart and cleaned. Due to this being a tee diverter the diverter is located within the bathtub faucet so you will want to start by trying to clean the faucet.

This reduces strain and wear on the diverter valves. The tub spout will loosen slightly from the wall and the diverter will not be able to stay in its raised position. When your plumber came over and change your new valve probly didn t take the cartrige out of the body of the valve and when he solder it together melted the rubber seal inside the valve so your solution to your problem try replacing the cartrige make sure you turn off the main water suplly in the house before you take it out and once you take it out put some grease on the new cartrige and put it back in and it sould cure your problem what kind of shower faucet do you have. To take out the valve unscrew the valve assembly from the nut located on the stem.

All are equally effective at keeping the water directed through the shower head until you release them. You will need to replace the tub spout and provide a bath stool for the leg shavers in your family to use when shaving. Remove the stem screw and washer.